🎉 Up to 70% Off Selected ItemsShop Sale
AXIS Q1972-E 25 mm 30 fps Thermal Camera (03031-001)
[shortdesc] Outdoor-ready thermal camera with a 25 mm F1.0 athermalized lens, 24° × 18.5° field of view, uncooled 640×480 thermal sensor, <20 mK sensitivity, 30 fps thermal imaging, ARTPEC-8 SoC with deep-learning unit, electronic image stabilization, and rugged IP66/IP67 & IK10 construction. [/shortdesc]
[properties]
| Model | AXIS Q1972-E 25 mm 30 fps Thermal Camera (03031-001) |
| Product Type | Thermal Camera |
| Image Sensor | Uncooled microbolometer, 640×480, 17 μm pixel pitch, spectral range 8–14 μm |
| Lens | 25 mm F1.0 athermalized; HFOV 24°, VFOV 18.5°; near focus 18.5 m (61 ft) |
| Sensitivity | NETD <20 mK @25 °C, F1.0 |
| Video Resolution | Sensor 640×480 (scaled to 800×600) |
| Frame Rate | Up to 30 fps |
| SoC | ARTPEC-8 with deep-learning processing unit (DLPU) |
| Memory | 2048 MB RAM, 8192 MB Flash |
| Power | PoE IEEE 802.3af/at Type 1 Class 3: typical 5.0 W, max 12.95 W; 12–28 V DC: typical 4.8 W, max 12.95 W |
| Casing | IP66/IP67, NEMA 250 Type 4X, IK10-rated aluminum & polycarbonate |
| Operating Conditions | -40 °C to 60 °C (-40 °F to 140 °F); 10–100% RH (condensing) |
| Storage Conditions | -40 °C to 65 °C (-40 °F to 149 °F); 5–95% RH (non-condensing) |
| Interfaces | Shielded RJ45 10BASE-T/100BASE-TX/1000BASE-T PoE; 3.5 mm mic/line in; DC input; terminal block for 1 supervised alarm input and 1 output (12 V DC, max. load 50 mA) |
| Storage | microSD/microSDHC/microSDXC slot; NAS (SMB/CIFS) |
| Weight | 1.4 kg (3.1 lb) |
| EPA | 0.022 m² (0.24 ft²) |
| Certifications | CSA, CE, UL/cUL, KC, TAA compliant |
[/properties]
[specifications]
| Performance | ARTPEC-8 SoC; deep-learning processing unit (DLPU) for AI analytics; electronic image stabilization (EIS); thermal palettes |
| Video | H.264 (Baseline/Main/High), H.265 (Main), Motion JPEG; sensor 640×480 scaled up to 800×600 (SVGA); up to 30 fps; Axis Zipstream technology in H.264 and H.265; up to 20 configurable video streams; controllable frame rate and bandwidth; VBR/ABR/MBR; rotation 0°/90°/180°/270° including corridor format; image settings for contrast, brightness, sharpness, exposure zones, compression, mirroring, dynamic text and image overlay, polygon privacy masks |
| Audio | Two-way audio (half/full duplex); automatic gain control (AGC); 10-band graphic equalizer; input for external unbalanced microphone with optional 5 V mic power; unbalanced line input; audio detection; audio encoding: 24-bit LPCM, AAC-LC 8/16/32/48 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz, Opus 8/16/48 kHz with configurable bitrate |
| Connectivity | IPv4, IPv6 USGv6, HTTP, HTTPS, HTTP/2, TLS, FTP, SFTP, CIFS/SMB, SMTP, SNMP v1/v2c/v3 (MIB-II), RTSP, RTP, SRTP/RTSPS, RTCP, TCP, UDP, DHCPv4/v6, DNS/DNSv6, DDNS, IGMP v1/v2/v3, NTP, PTP, NTS, SSH, LLDP, CDP, MQTT v3.1.1, mDNS (Bonjour), UPnP, QoS Layer 3 DiffServ, secure syslog (RFC 3164/5424 over UDP/TCP/TLS), ICMPv4/ICMPv6, link-local address (ZeroConf) |
| Power Supply | PoE IEEE 802.3af/at Type 1 Class 3 (typical 5.0 W, max 12.95 W); 12–28 V DC (typical 4.8 W, max 12.95 W) |
| Security Features | Axis Edge Vault cybersecurity platform; TPM 2.0 (CC EAL4+, FIPS 140-2 Level 2); secure element (CC EAL 6+); Axis Cryptographic Module (FIPS 140-2 Level 1); secure boot; signed firmware; signed video; encrypted filesystem (AES-XTS-Plain64 256-bit); AES-XTS-Plain64 256-bit SD-card encryption; Axis device ID; secure keystore; system-on-chip security (TEE); brute force delay protection; password protection; IEEE 802.1X; IEEE 802.1AE (MACsec PSK/EAP-TLS); IEEE 802.1AR; HTTPS/HSTS; TLS v1.2/v1.3; Network Time Security (NTS); host-based firewall |
| Environmental / Ruggedness | IP66/IP67; IK10; NEMA 250 Type 4X; NEMA TS 2 (2.2.7–2.2.9); IEC 60068-2-1/2/6/14/27/78; ISO 21207 Method B; MIL-STD-810H (selected methods, including 501.7, 502.7, 505.7, 506.6, 507.6, 509.7, 510.7, 514.8, 516.8, 521.4); operating temperature -40 °C to 60 °C; up to 74 °C maximum according to NEMA TS 2; humidity 10–100% RH (condensing) |
| Mounting Options | Supports wall, pole, corner, and conduit installation via compatible Axis mounts |
| Sensors | Gyroscopic sensors enabling electronic image stabilization; shock detection for event triggering |
| Events | Audio: audio detection, audio clip playing, audio clip currently playing; device status: above/below/within operating temperature, IP address removed, new IP address, network lost, system ready, ring power overcurrent protection, live stream active, shock detected; digital audio input status; edge storage: recording ongoing, storage disruption, storage health issues detected; I/O: digital input, manual trigger, virtual input; MQTT: stateless; scheduled and recurring: schedule; video: average bitrate degradation, tampering |
| Analytics | AXIS Video Motion Detection, AXIS Motion Guard, AXIS Fence Guard, AXIS Loitering Guard, audio detection, active tampering alarm; supports AXIS Perimeter Defender and third-party analytics via AXIS Camera Application Platform (ACAP) |
| Approvals | Product markings: CSA, UL/cUL, CE, KC; supply chain: TAA compliant; EMC: CISPR 35, CISPR 32 Class A, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, ICES(A)/NMB(A), VCCI Class A, KS C 9835, KS C 9832 Class A, FCC Part 15 Subpart B Class A, IEC 62236-4; Safety: CAN/CSA C22.2 No. 62368-1, IEC/EN/UL 62368-1, IS 13252; Environment: IEC 60068-2-1/2/6/14/27/78, IEC/EN 60529 IP66/IP67, IEC/EN 62262 IK10, ISO 21207 Method B, MIL-STD-810H (selected methods), NEMA 250 Type 4X, NEMA TS 2; Network: NIST SP500-267; Cybersecurity: ETSI EN 303 645, BSI IT Security Label, FIPS-140 related modules |
[/specifications]
[accesories]
| Included | Camera, installation guide, drill template, TORX L-keys, RESISTORX L-key, terminal block connector, connector guard, cable gaskets, owner authentication key |
| Optional Accessories | AXIS T94F01M J-Box/Gang Box Plate; AXIS T91A47 Pole Mount; AXIS T94P01B Corner Bracket; AXIS T94F01P Conduit Back Box; AXIS Weather Shield K; Axis PoE Midspans; AXIS T8415 Wireless Installation Tool; AXIS Surveillance Cards |
[/accesories]
Smooth, High-Frame-Rate Thermal Imaging for Reliable Detection
The AXIS Q1972-E 25 mm 30 fps variant delivers smooth thermal video ideal for scenes requiring higher motion clarity and real-time assessment. With a 24° field of view, it provides balanced medium-range detection suitable for perimeter protection, industrial facilities, and outdoor security deployments. Its <20 mK sensitivity ensures strong thermal contrast for accurate detection in all conditions.
Key Benefits
- Smooth 30 fps thermal imaging for real-time monitoring
- 25 mm F1.0 lens with 24° medium-range coverage
- High-resolution 640×480 sensor with <20 mK sensitivity
- ARTPEC-8 with DLPU for advanced analytics
- Electronic image stabilization reduces vibration impact
- Durable IP66/IP67, IK10, NEMA Type 4X outdoor protection
- Advanced cybersecurity with Axis Edge Vault and TPM 2.0
Ideal Use Cases
- Medium-range perimeter protection
- Critical infrastructure and industrial facility surveillance
- Outdoor monitoring requiring smooth 30 fps thermal video
- Low-visibility and harsh-environment security applications
Technical Specifications Summary
- Image sensor: 640×480 uncooled microbolometer, 17 μm
- Lens: 25 mm F1.0; HFOV 24°, VFOV 18.5°; near focus 18.5 m
- Sensitivity: NETD <20 mK
- Video: H.264/H.265/MJPEG; up to 30 fps; Zipstream; up to 20 streams
- Audio: Two-way audio; EQ; unbalanced mic/line input
- Power: PoE Class 3 or 12–28 V DC (typical 4.8–5.0 W, max 12.95 W)
- Environment: IP66/IP67, IK10, NEMA 4X, MIL-STD-810H; -40 °C to 60 °C
- Security: Edge Vault, TPM 2.0, secure boot, signed firmware/video
Upgrade Your Operations
Strengthen your perimeter and industrial security with smooth, high-frame-rate thermal imaging.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
AXIS Q1972-E 25 mm 30 fps Thermal Camera (03031-001)
AXIS Q1972-E 25 mm 30 fps Thermal Camera (03031-001)
[shortdesc] Outdoor-ready thermal camera with a 25 mm F1.0 athermalized lens, 24° × 18.5° field of view, uncooled 640×480 thermal sensor, <20 mK sensitivity, 30 fps thermal imaging, ARTPEC-8 SoC with deep-learning unit, electronic image stabilization, and rugged IP66/IP67 & IK10 construction. [/shortdesc]
[properties]
| Model | AXIS Q1972-E 25 mm 30 fps Thermal Camera (03031-001) |
| Product Type | Thermal Camera |
| Image Sensor | Uncooled microbolometer, 640×480, 17 μm pixel pitch, spectral range 8–14 μm |
| Lens | 25 mm F1.0 athermalized; HFOV 24°, VFOV 18.5°; near focus 18.5 m (61 ft) |
| Sensitivity | NETD <20 mK @25 °C, F1.0 |
| Video Resolution | Sensor 640×480 (scaled to 800×600) |
| Frame Rate | Up to 30 fps |
| SoC | ARTPEC-8 with deep-learning processing unit (DLPU) |
| Memory | 2048 MB RAM, 8192 MB Flash |
| Power | PoE IEEE 802.3af/at Type 1 Class 3: typical 5.0 W, max 12.95 W; 12–28 V DC: typical 4.8 W, max 12.95 W |
| Casing | IP66/IP67, NEMA 250 Type 4X, IK10-rated aluminum & polycarbonate |
| Operating Conditions | -40 °C to 60 °C (-40 °F to 140 °F); 10–100% RH (condensing) |
| Storage Conditions | -40 °C to 65 °C (-40 °F to 149 °F); 5–95% RH (non-condensing) |
| Interfaces | Shielded RJ45 10BASE-T/100BASE-TX/1000BASE-T PoE; 3.5 mm mic/line in; DC input; terminal block for 1 supervised alarm input and 1 output (12 V DC, max. load 50 mA) |
| Storage | microSD/microSDHC/microSDXC slot; NAS (SMB/CIFS) |
| Weight | 1.4 kg (3.1 lb) |
| EPA | 0.022 m² (0.24 ft²) |
| Certifications | CSA, CE, UL/cUL, KC, TAA compliant |
[/properties]
[specifications]
| Performance | ARTPEC-8 SoC; deep-learning processing unit (DLPU) for AI analytics; electronic image stabilization (EIS); thermal palettes |
| Video | H.264 (Baseline/Main/High), H.265 (Main), Motion JPEG; sensor 640×480 scaled up to 800×600 (SVGA); up to 30 fps; Axis Zipstream technology in H.264 and H.265; up to 20 configurable video streams; controllable frame rate and bandwidth; VBR/ABR/MBR; rotation 0°/90°/180°/270° including corridor format; image settings for contrast, brightness, sharpness, exposure zones, compression, mirroring, dynamic text and image overlay, polygon privacy masks |
| Audio | Two-way audio (half/full duplex); automatic gain control (AGC); 10-band graphic equalizer; input for external unbalanced microphone with optional 5 V mic power; unbalanced line input; audio detection; audio encoding: 24-bit LPCM, AAC-LC 8/16/32/48 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz, Opus 8/16/48 kHz with configurable bitrate |
| Connectivity | IPv4, IPv6 USGv6, HTTP, HTTPS, HTTP/2, TLS, FTP, SFTP, CIFS/SMB, SMTP, SNMP v1/v2c/v3 (MIB-II), RTSP, RTP, SRTP/RTSPS, RTCP, TCP, UDP, DHCPv4/v6, DNS/DNSv6, DDNS, IGMP v1/v2/v3, NTP, PTP, NTS, SSH, LLDP, CDP, MQTT v3.1.1, mDNS (Bonjour), UPnP, QoS Layer 3 DiffServ, secure syslog (RFC 3164/5424 over UDP/TCP/TLS), ICMPv4/ICMPv6, link-local address (ZeroConf) |
| Power Supply | PoE IEEE 802.3af/at Type 1 Class 3 (typical 5.0 W, max 12.95 W); 12–28 V DC (typical 4.8 W, max 12.95 W) |
| Security Features | Axis Edge Vault cybersecurity platform; TPM 2.0 (CC EAL4+, FIPS 140-2 Level 2); secure element (CC EAL 6+); Axis Cryptographic Module (FIPS 140-2 Level 1); secure boot; signed firmware; signed video; encrypted filesystem (AES-XTS-Plain64 256-bit); AES-XTS-Plain64 256-bit SD-card encryption; Axis device ID; secure keystore; system-on-chip security (TEE); brute force delay protection; password protection; IEEE 802.1X; IEEE 802.1AE (MACsec PSK/EAP-TLS); IEEE 802.1AR; HTTPS/HSTS; TLS v1.2/v1.3; Network Time Security (NTS); host-based firewall |
| Environmental / Ruggedness | IP66/IP67; IK10; NEMA 250 Type 4X; NEMA TS 2 (2.2.7–2.2.9); IEC 60068-2-1/2/6/14/27/78; ISO 21207 Method B; MIL-STD-810H (selected methods, including 501.7, 502.7, 505.7, 506.6, 507.6, 509.7, 510.7, 514.8, 516.8, 521.4); operating temperature -40 °C to 60 °C; up to 74 °C maximum according to NEMA TS 2; humidity 10–100% RH (condensing) |
| Mounting Options | Supports wall, pole, corner, and conduit installation via compatible Axis mounts |
| Sensors | Gyroscopic sensors enabling electronic image stabilization; shock detection for event triggering |
| Events | Audio: audio detection, audio clip playing, audio clip currently playing; device status: above/below/within operating temperature, IP address removed, new IP address, network lost, system ready, ring power overcurrent protection, live stream active, shock detected; digital audio input status; edge storage: recording ongoing, storage disruption, storage health issues detected; I/O: digital input, manual trigger, virtual input; MQTT: stateless; scheduled and recurring: schedule; video: average bitrate degradation, tampering |
| Analytics | AXIS Video Motion Detection, AXIS Motion Guard, AXIS Fence Guard, AXIS Loitering Guard, audio detection, active tampering alarm; supports AXIS Perimeter Defender and third-party analytics via AXIS Camera Application Platform (ACAP) |
| Approvals | Product markings: CSA, UL/cUL, CE, KC; supply chain: TAA compliant; EMC: CISPR 35, CISPR 32 Class A, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, ICES(A)/NMB(A), VCCI Class A, KS C 9835, KS C 9832 Class A, FCC Part 15 Subpart B Class A, IEC 62236-4; Safety: CAN/CSA C22.2 No. 62368-1, IEC/EN/UL 62368-1, IS 13252; Environment: IEC 60068-2-1/2/6/14/27/78, IEC/EN 60529 IP66/IP67, IEC/EN 62262 IK10, ISO 21207 Method B, MIL-STD-810H (selected methods), NEMA 250 Type 4X, NEMA TS 2; Network: NIST SP500-267; Cybersecurity: ETSI EN 303 645, BSI IT Security Label, FIPS-140 related modules |
[/specifications]
[accesories]
| Included | Camera, installation guide, drill template, TORX L-keys, RESISTORX L-key, terminal block connector, connector guard, cable gaskets, owner authentication key |
| Optional Accessories | AXIS T94F01M J-Box/Gang Box Plate; AXIS T91A47 Pole Mount; AXIS T94P01B Corner Bracket; AXIS T94F01P Conduit Back Box; AXIS Weather Shield K; Axis PoE Midspans; AXIS T8415 Wireless Installation Tool; AXIS Surveillance Cards |
[/accesories]
Smooth, High-Frame-Rate Thermal Imaging for Reliable Detection
The AXIS Q1972-E 25 mm 30 fps variant delivers smooth thermal video ideal for scenes requiring higher motion clarity and real-time assessment. With a 24° field of view, it provides balanced medium-range detection suitable for perimeter protection, industrial facilities, and outdoor security deployments. Its <20 mK sensitivity ensures strong thermal contrast for accurate detection in all conditions.
Key Benefits
- Smooth 30 fps thermal imaging for real-time monitoring
- 25 mm F1.0 lens with 24° medium-range coverage
- High-resolution 640×480 sensor with <20 mK sensitivity
- ARTPEC-8 with DLPU for advanced analytics
- Electronic image stabilization reduces vibration impact
- Durable IP66/IP67, IK10, NEMA Type 4X outdoor protection
- Advanced cybersecurity with Axis Edge Vault and TPM 2.0
Ideal Use Cases
- Medium-range perimeter protection
- Critical infrastructure and industrial facility surveillance
- Outdoor monitoring requiring smooth 30 fps thermal video
- Low-visibility and harsh-environment security applications
Technical Specifications Summary
- Image sensor: 640×480 uncooled microbolometer, 17 μm
- Lens: 25 mm F1.0; HFOV 24°, VFOV 18.5°; near focus 18.5 m
- Sensitivity: NETD <20 mK
- Video: H.264/H.265/MJPEG; up to 30 fps; Zipstream; up to 20 streams
- Audio: Two-way audio; EQ; unbalanced mic/line input
- Power: PoE Class 3 or 12–28 V DC (typical 4.8–5.0 W, max 12.95 W)
- Environment: IP66/IP67, IK10, NEMA 4X, MIL-STD-810H; -40 °C to 60 °C
- Security: Edge Vault, TPM 2.0, secure boot, signed firmware/video
Upgrade Your Operations
Strengthen your perimeter and industrial security with smooth, high-frame-rate thermal imaging.
$6,693.00
AXIS Q1972-E 25 mm 30 fps Thermal Camera (03031-001)—
$6,693.00
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
[shortdesc] Outdoor-ready thermal camera with a 25 mm F1.0 athermalized lens, 24° × 18.5° field of view, uncooled 640×480 thermal sensor, <20 mK sensitivity, 30 fps thermal imaging, ARTPEC-8 SoC with deep-learning unit, electronic image stabilization, and rugged IP66/IP67 & IK10 construction. [/shortdesc]
[properties]
| Model | AXIS Q1972-E 25 mm 30 fps Thermal Camera (03031-001) |
| Product Type | Thermal Camera |
| Image Sensor | Uncooled microbolometer, 640×480, 17 μm pixel pitch, spectral range 8–14 μm |
| Lens | 25 mm F1.0 athermalized; HFOV 24°, VFOV 18.5°; near focus 18.5 m (61 ft) |
| Sensitivity | NETD <20 mK @25 °C, F1.0 |
| Video Resolution | Sensor 640×480 (scaled to 800×600) |
| Frame Rate | Up to 30 fps |
| SoC | ARTPEC-8 with deep-learning processing unit (DLPU) |
| Memory | 2048 MB RAM, 8192 MB Flash |
| Power | PoE IEEE 802.3af/at Type 1 Class 3: typical 5.0 W, max 12.95 W; 12–28 V DC: typical 4.8 W, max 12.95 W |
| Casing | IP66/IP67, NEMA 250 Type 4X, IK10-rated aluminum & polycarbonate |
| Operating Conditions | -40 °C to 60 °C (-40 °F to 140 °F); 10–100% RH (condensing) |
| Storage Conditions | -40 °C to 65 °C (-40 °F to 149 °F); 5–95% RH (non-condensing) |
| Interfaces | Shielded RJ45 10BASE-T/100BASE-TX/1000BASE-T PoE; 3.5 mm mic/line in; DC input; terminal block for 1 supervised alarm input and 1 output (12 V DC, max. load 50 mA) |
| Storage | microSD/microSDHC/microSDXC slot; NAS (SMB/CIFS) |
| Weight | 1.4 kg (3.1 lb) |
| EPA | 0.022 m² (0.24 ft²) |
| Certifications | CSA, CE, UL/cUL, KC, TAA compliant |
[/properties]
[specifications]
| Performance | ARTPEC-8 SoC; deep-learning processing unit (DLPU) for AI analytics; electronic image stabilization (EIS); thermal palettes |
| Video | H.264 (Baseline/Main/High), H.265 (Main), Motion JPEG; sensor 640×480 scaled up to 800×600 (SVGA); up to 30 fps; Axis Zipstream technology in H.264 and H.265; up to 20 configurable video streams; controllable frame rate and bandwidth; VBR/ABR/MBR; rotation 0°/90°/180°/270° including corridor format; image settings for contrast, brightness, sharpness, exposure zones, compression, mirroring, dynamic text and image overlay, polygon privacy masks |
| Audio | Two-way audio (half/full duplex); automatic gain control (AGC); 10-band graphic equalizer; input for external unbalanced microphone with optional 5 V mic power; unbalanced line input; audio detection; audio encoding: 24-bit LPCM, AAC-LC 8/16/32/48 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz, Opus 8/16/48 kHz with configurable bitrate |
| Connectivity | IPv4, IPv6 USGv6, HTTP, HTTPS, HTTP/2, TLS, FTP, SFTP, CIFS/SMB, SMTP, SNMP v1/v2c/v3 (MIB-II), RTSP, RTP, SRTP/RTSPS, RTCP, TCP, UDP, DHCPv4/v6, DNS/DNSv6, DDNS, IGMP v1/v2/v3, NTP, PTP, NTS, SSH, LLDP, CDP, MQTT v3.1.1, mDNS (Bonjour), UPnP, QoS Layer 3 DiffServ, secure syslog (RFC 3164/5424 over UDP/TCP/TLS), ICMPv4/ICMPv6, link-local address (ZeroConf) |
| Power Supply | PoE IEEE 802.3af/at Type 1 Class 3 (typical 5.0 W, max 12.95 W); 12–28 V DC (typical 4.8 W, max 12.95 W) |
| Security Features | Axis Edge Vault cybersecurity platform; TPM 2.0 (CC EAL4+, FIPS 140-2 Level 2); secure element (CC EAL 6+); Axis Cryptographic Module (FIPS 140-2 Level 1); secure boot; signed firmware; signed video; encrypted filesystem (AES-XTS-Plain64 256-bit); AES-XTS-Plain64 256-bit SD-card encryption; Axis device ID; secure keystore; system-on-chip security (TEE); brute force delay protection; password protection; IEEE 802.1X; IEEE 802.1AE (MACsec PSK/EAP-TLS); IEEE 802.1AR; HTTPS/HSTS; TLS v1.2/v1.3; Network Time Security (NTS); host-based firewall |
| Environmental / Ruggedness | IP66/IP67; IK10; NEMA 250 Type 4X; NEMA TS 2 (2.2.7–2.2.9); IEC 60068-2-1/2/6/14/27/78; ISO 21207 Method B; MIL-STD-810H (selected methods, including 501.7, 502.7, 505.7, 506.6, 507.6, 509.7, 510.7, 514.8, 516.8, 521.4); operating temperature -40 °C to 60 °C; up to 74 °C maximum according to NEMA TS 2; humidity 10–100% RH (condensing) |
| Mounting Options | Supports wall, pole, corner, and conduit installation via compatible Axis mounts |
| Sensors | Gyroscopic sensors enabling electronic image stabilization; shock detection for event triggering |
| Events | Audio: audio detection, audio clip playing, audio clip currently playing; device status: above/below/within operating temperature, IP address removed, new IP address, network lost, system ready, ring power overcurrent protection, live stream active, shock detected; digital audio input status; edge storage: recording ongoing, storage disruption, storage health issues detected; I/O: digital input, manual trigger, virtual input; MQTT: stateless; scheduled and recurring: schedule; video: average bitrate degradation, tampering |
| Analytics | AXIS Video Motion Detection, AXIS Motion Guard, AXIS Fence Guard, AXIS Loitering Guard, audio detection, active tampering alarm; supports AXIS Perimeter Defender and third-party analytics via AXIS Camera Application Platform (ACAP) |
| Approvals | Product markings: CSA, UL/cUL, CE, KC; supply chain: TAA compliant; EMC: CISPR 35, CISPR 32 Class A, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, ICES(A)/NMB(A), VCCI Class A, KS C 9835, KS C 9832 Class A, FCC Part 15 Subpart B Class A, IEC 62236-4; Safety: CAN/CSA C22.2 No. 62368-1, IEC/EN/UL 62368-1, IS 13252; Environment: IEC 60068-2-1/2/6/14/27/78, IEC/EN 60529 IP66/IP67, IEC/EN 62262 IK10, ISO 21207 Method B, MIL-STD-810H (selected methods), NEMA 250 Type 4X, NEMA TS 2; Network: NIST SP500-267; Cybersecurity: ETSI EN 303 645, BSI IT Security Label, FIPS-140 related modules |
[/specifications]
[accesories]
| Included | Camera, installation guide, drill template, TORX L-keys, RESISTORX L-key, terminal block connector, connector guard, cable gaskets, owner authentication key |
| Optional Accessories | AXIS T94F01M J-Box/Gang Box Plate; AXIS T91A47 Pole Mount; AXIS T94P01B Corner Bracket; AXIS T94F01P Conduit Back Box; AXIS Weather Shield K; Axis PoE Midspans; AXIS T8415 Wireless Installation Tool; AXIS Surveillance Cards |
[/accesories]
Smooth, High-Frame-Rate Thermal Imaging for Reliable Detection
The AXIS Q1972-E 25 mm 30 fps variant delivers smooth thermal video ideal for scenes requiring higher motion clarity and real-time assessment. With a 24° field of view, it provides balanced medium-range detection suitable for perimeter protection, industrial facilities, and outdoor security deployments. Its <20 mK sensitivity ensures strong thermal contrast for accurate detection in all conditions.
Key Benefits
- Smooth 30 fps thermal imaging for real-time monitoring
- 25 mm F1.0 lens with 24° medium-range coverage
- High-resolution 640×480 sensor with <20 mK sensitivity
- ARTPEC-8 with DLPU for advanced analytics
- Electronic image stabilization reduces vibration impact
- Durable IP66/IP67, IK10, NEMA Type 4X outdoor protection
- Advanced cybersecurity with Axis Edge Vault and TPM 2.0
Ideal Use Cases
- Medium-range perimeter protection
- Critical infrastructure and industrial facility surveillance
- Outdoor monitoring requiring smooth 30 fps thermal video
- Low-visibility and harsh-environment security applications
Technical Specifications Summary
- Image sensor: 640×480 uncooled microbolometer, 17 μm
- Lens: 25 mm F1.0; HFOV 24°, VFOV 18.5°; near focus 18.5 m
- Sensitivity: NETD <20 mK
- Video: H.264/H.265/MJPEG; up to 30 fps; Zipstream; up to 20 streams
- Audio: Two-way audio; EQ; unbalanced mic/line input
- Power: PoE Class 3 or 12–28 V DC (typical 4.8–5.0 W, max 12.95 W)
- Environment: IP66/IP67, IK10, NEMA 4X, MIL-STD-810H; -40 °C to 60 °C
- Security: Edge Vault, TPM 2.0, secure boot, signed firmware/video
Upgrade Your Operations
Strengthen your perimeter and industrial security with smooth, high-frame-rate thermal imaging.
