🎉 Up to 70% Off Selected ItemsShop Sale
AXIS Q1972-E 10 mm 30 fps Thermal Camera (03027-001)
[shortdesc] Outdoor-ready thermal camera with a 10 mm F1.2 athermalized lens, wide 63° × 46° field of view, uncooled 640×480 thermal sensor, <20 mK sensitivity, high-frame-rate 30 fps thermal imaging, ARTPEC-8 DLPU analytics, electronic image stabilization, and rugged IP66/IP67 & IK10 construction. [/shortdesc]
[properties]
| Model | AXIS Q1972-E 10 mm 30 fps Thermal Camera (03027-001) |
| Product Type | Thermal Camera |
| Image Sensor | Uncooled microbolometer, 640×480 px, 17 μm, spectral range 8–14 μm |
| Lens | 10 mm F1.2 athermalized; HFOV 63°, VFOV 46°; near focus 2.8 m (9.2 ft) |
| Sensitivity | NETD <20 mK @25 °C (77 °F), F1.0 |
| Video Resolution | Sensor 640×480; scalable up to 800×600 (SVGA) |
| Frame Rate | Up to 30 fps |
| SoC | ARTPEC-8 with deep-learning processing unit (DLPU) |
| Memory | 2048 MB RAM, 8192 MB Flash |
| Power | PoE IEEE 802.3af/802.3at Type 1 Class 3; typical 5.0 W, max 12.95 W; 12–28 V DC (typ. 4.8 W) |
| Casing | IP66/IP67-, NEMA 4X-, and IK10-rated; aluminum & polycarbonate |
| Operating Conditions | -40 °C to 60 °C (-40 °F to 140 °F); 10–100% RH (condensing) |
| Storage Conditions | -40 °C to 65 °C (-40 °F to 149 °F); 5–95% RH (non-condensing) |
| Interfaces | RJ45 10/100/1000BASE-T PoE; 3.5 mm mic/line in; DC input (terminal block); 1 supervised alarm I/O (12 V DC out, max 50 mA) |
| Storage | microSD/microSDHC/microSDXC support; NAS recording |
| Weight | 1.4 kg (3.1 lb) |
| EPA | 0.022 m² (0.24 ft²) |
| Certifications | CISPR 35, CISPR 32 Class A, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-3-2/3-3, EN 61000-6-1/6-2; FCC Part 15 Subpart B Class A; ICES(A)/NMB(A); VCCI Class A; KS C 9835/9832 Class A; IEC 62236-4; UL/IEC/EN 62368-1; NEMA 250 Type 4X; TAA compliant |
[/properties]
[specifications]
| Performance | ARTPEC-8 SoC; DLPU; electronic image stabilization (EIS); thermal palettes; shock detection |
| Video | H.264, H.265, Motion JPEG; up to 30 fps; up to 20 video streams; Axis Zipstream; VBR/ABR/MBR; rotation 0°/90°/180°/270° including corridor format; brightness; contrast; sharpness; exposure zones; mirroring; dynamic overlays; polygon privacy masks |
| Audio | Two-way audio (half/full duplex); AGC; 10-band EQ; Spectrum visualizer (ACAP); unbalanced mic/line input with optional 5 V mic power; digital audio input with optional 12 V ring power; audio detection; LPCM, AAC-LC, G.711, G.726, Opus |
| Connectivity | IPv4, IPv6 USGv6, HTTP, HTTPS, HTTP/2, TLS, FTP, SFTP, CIFS/SMB, SMTP, mDNS, UPnP, SNMP v1/v2c/v3, DNS/DNSv6, DDNS, NTP, PTP, NTS, RTSP, RTP, SRTP/RTSPS, TCP, UDP, IGMPv1/v2/v3, DHCPv4/v6, SSH, LLDP, CDP, MQTT v3.1.1, secure syslog, ZeroConf |
| Power Supply | PoE IEEE 802.3af/at Type 1 Class 3; typical 5.0 W, max 12.95 W; 12–28 V DC |
| Security Features | Axis Edge Vault; TPM 2.0 (FIPS 140-2 Level 2); secure boot; signed firmware; signed video; AES-XTS-Plain64 256-bit SD encryption; encrypted filesystem; password protection; brute-force delay; IEEE 802.1X; MACsec; HTTPS/HSTS; firewall |
| Environmental / Ruggedness | IEC/EN 60529 IP66/IP67; IK10; NEMA 4X; MIL-STD-810H; ISO 21207 Method B; NEMA TS 2 (2.2.7–2.2.9) |
| Mounting Options | Supports Axis wall, pole, corner, and conduit mounts |
| Sensors | Gyroscopic sensors for EIS; shock detection |
| Events | Audio detection; audio clip events; device temperature alarms; IP address changes; network lost; system ready; ring power overcurrent protection; live stream active; shock detected; storage disruptions or health issues; digital input; virtual input; manual triggers; MQTT (stateless); scheduled and recurring events; video tampering; bitrate degradation |
| Approvals | CISPR 35, CISPR 32 Class A, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-3-2/3-3, EN 61000-6-1/6-2; FCC Part 15B Class A; ICES(A)/NMB(A); VCCI Class A; KS C 9835/9832 Class A; IEC 62236-4; UL/IEC/EN 62368-1; NEMA 250 Type 4X |
[/specifications]
[accesories]
| Included | Camera, installation guide, drill template, TORX L-keys, RESISTORX L-key, terminal block connector, connector guard, cable gaskets, owner authentication key |
| Optional Accessories | AXIS T94F01M J-Box/Gang Box Plate; AXIS T91A47 Pole Mount; AXIS T94P01B Corner Bracket; AXIS T94F01P Conduit Back Box; AXIS Weather Shield K; Axis PoE Midspans; AXIS T8415 Wireless Installation Tool; AXIS Surveillance Cards |
[/accesories]
High-Frame-Rate Thermal Imaging for Dynamic Outdoor Security
The AXIS Q1972-E 10 mm 30 fps variant provides high-frame-rate thermal imaging optimized for fast-moving scenes and perimeter protection. With a wide 63° horizontal field of view and a 640×480 uncooled sensor offering <20 mK sensitivity, it delivers precise thermal contrast even in total darkness, smoke, or fog. Built with ARTPEC-8 and DLPU, it enables advanced on-edge analytics and reliable detection.
Key Benefits
- High-frame-rate 30 fps thermal imaging
- Wide 63° horizontal coverage
- 640×480 sensor with <20 mK sensitivity
- ARTPEC-8 with DLPU for advanced analytics
- Electronic image stabilization (EIS)
- IP66/IP67, IK10, NEMA 4X rugged design
- Advanced cybersecurity with TPM 2.0 and Axis Edge Vault
Ideal Use Cases
- Dynamic perimeter surveillance
- Wide-area industrial security
- Applications requiring smooth thermal video
- Environments with difficult lighting or harsh conditions
Technical Specifications Summary
- Image sensor: 640×480 uncooled microbolometer, 17 μm
- Lens: 10 mm F1.2; 63° × 46° FoV
- Video: H.264/H.265/MJPEG; up to 30 fps
- Sensitivity: NETD <20 mK
- Power: PoE Class 3; 12–28 V DC
- Environment: IP66/IP67, IK10, NEMA 4X
- Security: Edge Vault, TPM 2.0, secure boot, signed video
Upgrade Your Operations
Enhance outdoor security with fast, high-quality thermal imaging and powerful on-edge analytics.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
AXIS Q1972-E 10 mm 30 fps Thermal Camera (03027-001)
AXIS Q1972-E 10 mm 30 fps Thermal Camera (03027-001)
[shortdesc] Outdoor-ready thermal camera with a 10 mm F1.2 athermalized lens, wide 63° × 46° field of view, uncooled 640×480 thermal sensor, <20 mK sensitivity, high-frame-rate 30 fps thermal imaging, ARTPEC-8 DLPU analytics, electronic image stabilization, and rugged IP66/IP67 & IK10 construction. [/shortdesc]
[properties]
| Model | AXIS Q1972-E 10 mm 30 fps Thermal Camera (03027-001) |
| Product Type | Thermal Camera |
| Image Sensor | Uncooled microbolometer, 640×480 px, 17 μm, spectral range 8–14 μm |
| Lens | 10 mm F1.2 athermalized; HFOV 63°, VFOV 46°; near focus 2.8 m (9.2 ft) |
| Sensitivity | NETD <20 mK @25 °C (77 °F), F1.0 |
| Video Resolution | Sensor 640×480; scalable up to 800×600 (SVGA) |
| Frame Rate | Up to 30 fps |
| SoC | ARTPEC-8 with deep-learning processing unit (DLPU) |
| Memory | 2048 MB RAM, 8192 MB Flash |
| Power | PoE IEEE 802.3af/802.3at Type 1 Class 3; typical 5.0 W, max 12.95 W; 12–28 V DC (typ. 4.8 W) |
| Casing | IP66/IP67-, NEMA 4X-, and IK10-rated; aluminum & polycarbonate |
| Operating Conditions | -40 °C to 60 °C (-40 °F to 140 °F); 10–100% RH (condensing) |
| Storage Conditions | -40 °C to 65 °C (-40 °F to 149 °F); 5–95% RH (non-condensing) |
| Interfaces | RJ45 10/100/1000BASE-T PoE; 3.5 mm mic/line in; DC input (terminal block); 1 supervised alarm I/O (12 V DC out, max 50 mA) |
| Storage | microSD/microSDHC/microSDXC support; NAS recording |
| Weight | 1.4 kg (3.1 lb) |
| EPA | 0.022 m² (0.24 ft²) |
| Certifications | CISPR 35, CISPR 32 Class A, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-3-2/3-3, EN 61000-6-1/6-2; FCC Part 15 Subpart B Class A; ICES(A)/NMB(A); VCCI Class A; KS C 9835/9832 Class A; IEC 62236-4; UL/IEC/EN 62368-1; NEMA 250 Type 4X; TAA compliant |
[/properties]
[specifications]
| Performance | ARTPEC-8 SoC; DLPU; electronic image stabilization (EIS); thermal palettes; shock detection |
| Video | H.264, H.265, Motion JPEG; up to 30 fps; up to 20 video streams; Axis Zipstream; VBR/ABR/MBR; rotation 0°/90°/180°/270° including corridor format; brightness; contrast; sharpness; exposure zones; mirroring; dynamic overlays; polygon privacy masks |
| Audio | Two-way audio (half/full duplex); AGC; 10-band EQ; Spectrum visualizer (ACAP); unbalanced mic/line input with optional 5 V mic power; digital audio input with optional 12 V ring power; audio detection; LPCM, AAC-LC, G.711, G.726, Opus |
| Connectivity | IPv4, IPv6 USGv6, HTTP, HTTPS, HTTP/2, TLS, FTP, SFTP, CIFS/SMB, SMTP, mDNS, UPnP, SNMP v1/v2c/v3, DNS/DNSv6, DDNS, NTP, PTP, NTS, RTSP, RTP, SRTP/RTSPS, TCP, UDP, IGMPv1/v2/v3, DHCPv4/v6, SSH, LLDP, CDP, MQTT v3.1.1, secure syslog, ZeroConf |
| Power Supply | PoE IEEE 802.3af/at Type 1 Class 3; typical 5.0 W, max 12.95 W; 12–28 V DC |
| Security Features | Axis Edge Vault; TPM 2.0 (FIPS 140-2 Level 2); secure boot; signed firmware; signed video; AES-XTS-Plain64 256-bit SD encryption; encrypted filesystem; password protection; brute-force delay; IEEE 802.1X; MACsec; HTTPS/HSTS; firewall |
| Environmental / Ruggedness | IEC/EN 60529 IP66/IP67; IK10; NEMA 4X; MIL-STD-810H; ISO 21207 Method B; NEMA TS 2 (2.2.7–2.2.9) |
| Mounting Options | Supports Axis wall, pole, corner, and conduit mounts |
| Sensors | Gyroscopic sensors for EIS; shock detection |
| Events | Audio detection; audio clip events; device temperature alarms; IP address changes; network lost; system ready; ring power overcurrent protection; live stream active; shock detected; storage disruptions or health issues; digital input; virtual input; manual triggers; MQTT (stateless); scheduled and recurring events; video tampering; bitrate degradation |
| Approvals | CISPR 35, CISPR 32 Class A, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-3-2/3-3, EN 61000-6-1/6-2; FCC Part 15B Class A; ICES(A)/NMB(A); VCCI Class A; KS C 9835/9832 Class A; IEC 62236-4; UL/IEC/EN 62368-1; NEMA 250 Type 4X |
[/specifications]
[accesories]
| Included | Camera, installation guide, drill template, TORX L-keys, RESISTORX L-key, terminal block connector, connector guard, cable gaskets, owner authentication key |
| Optional Accessories | AXIS T94F01M J-Box/Gang Box Plate; AXIS T91A47 Pole Mount; AXIS T94P01B Corner Bracket; AXIS T94F01P Conduit Back Box; AXIS Weather Shield K; Axis PoE Midspans; AXIS T8415 Wireless Installation Tool; AXIS Surveillance Cards |
[/accesories]
High-Frame-Rate Thermal Imaging for Dynamic Outdoor Security
The AXIS Q1972-E 10 mm 30 fps variant provides high-frame-rate thermal imaging optimized for fast-moving scenes and perimeter protection. With a wide 63° horizontal field of view and a 640×480 uncooled sensor offering <20 mK sensitivity, it delivers precise thermal contrast even in total darkness, smoke, or fog. Built with ARTPEC-8 and DLPU, it enables advanced on-edge analytics and reliable detection.
Key Benefits
- High-frame-rate 30 fps thermal imaging
- Wide 63° horizontal coverage
- 640×480 sensor with <20 mK sensitivity
- ARTPEC-8 with DLPU for advanced analytics
- Electronic image stabilization (EIS)
- IP66/IP67, IK10, NEMA 4X rugged design
- Advanced cybersecurity with TPM 2.0 and Axis Edge Vault
Ideal Use Cases
- Dynamic perimeter surveillance
- Wide-area industrial security
- Applications requiring smooth thermal video
- Environments with difficult lighting or harsh conditions
Technical Specifications Summary
- Image sensor: 640×480 uncooled microbolometer, 17 μm
- Lens: 10 mm F1.2; 63° × 46° FoV
- Video: H.264/H.265/MJPEG; up to 30 fps
- Sensitivity: NETD <20 mK
- Power: PoE Class 3; 12–28 V DC
- Environment: IP66/IP67, IK10, NEMA 4X
- Security: Edge Vault, TPM 2.0, secure boot, signed video
Upgrade Your Operations
Enhance outdoor security with fast, high-quality thermal imaging and powerful on-edge analytics.
$6,157.00
AXIS Q1972-E 10 mm 30 fps Thermal Camera (03027-001)—
$6,157.00
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
[shortdesc] Outdoor-ready thermal camera with a 10 mm F1.2 athermalized lens, wide 63° × 46° field of view, uncooled 640×480 thermal sensor, <20 mK sensitivity, high-frame-rate 30 fps thermal imaging, ARTPEC-8 DLPU analytics, electronic image stabilization, and rugged IP66/IP67 & IK10 construction. [/shortdesc]
[properties]
| Model | AXIS Q1972-E 10 mm 30 fps Thermal Camera (03027-001) |
| Product Type | Thermal Camera |
| Image Sensor | Uncooled microbolometer, 640×480 px, 17 μm, spectral range 8–14 μm |
| Lens | 10 mm F1.2 athermalized; HFOV 63°, VFOV 46°; near focus 2.8 m (9.2 ft) |
| Sensitivity | NETD <20 mK @25 °C (77 °F), F1.0 |
| Video Resolution | Sensor 640×480; scalable up to 800×600 (SVGA) |
| Frame Rate | Up to 30 fps |
| SoC | ARTPEC-8 with deep-learning processing unit (DLPU) |
| Memory | 2048 MB RAM, 8192 MB Flash |
| Power | PoE IEEE 802.3af/802.3at Type 1 Class 3; typical 5.0 W, max 12.95 W; 12–28 V DC (typ. 4.8 W) |
| Casing | IP66/IP67-, NEMA 4X-, and IK10-rated; aluminum & polycarbonate |
| Operating Conditions | -40 °C to 60 °C (-40 °F to 140 °F); 10–100% RH (condensing) |
| Storage Conditions | -40 °C to 65 °C (-40 °F to 149 °F); 5–95% RH (non-condensing) |
| Interfaces | RJ45 10/100/1000BASE-T PoE; 3.5 mm mic/line in; DC input (terminal block); 1 supervised alarm I/O (12 V DC out, max 50 mA) |
| Storage | microSD/microSDHC/microSDXC support; NAS recording |
| Weight | 1.4 kg (3.1 lb) |
| EPA | 0.022 m² (0.24 ft²) |
| Certifications | CISPR 35, CISPR 32 Class A, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-3-2/3-3, EN 61000-6-1/6-2; FCC Part 15 Subpart B Class A; ICES(A)/NMB(A); VCCI Class A; KS C 9835/9832 Class A; IEC 62236-4; UL/IEC/EN 62368-1; NEMA 250 Type 4X; TAA compliant |
[/properties]
[specifications]
| Performance | ARTPEC-8 SoC; DLPU; electronic image stabilization (EIS); thermal palettes; shock detection |
| Video | H.264, H.265, Motion JPEG; up to 30 fps; up to 20 video streams; Axis Zipstream; VBR/ABR/MBR; rotation 0°/90°/180°/270° including corridor format; brightness; contrast; sharpness; exposure zones; mirroring; dynamic overlays; polygon privacy masks |
| Audio | Two-way audio (half/full duplex); AGC; 10-band EQ; Spectrum visualizer (ACAP); unbalanced mic/line input with optional 5 V mic power; digital audio input with optional 12 V ring power; audio detection; LPCM, AAC-LC, G.711, G.726, Opus |
| Connectivity | IPv4, IPv6 USGv6, HTTP, HTTPS, HTTP/2, TLS, FTP, SFTP, CIFS/SMB, SMTP, mDNS, UPnP, SNMP v1/v2c/v3, DNS/DNSv6, DDNS, NTP, PTP, NTS, RTSP, RTP, SRTP/RTSPS, TCP, UDP, IGMPv1/v2/v3, DHCPv4/v6, SSH, LLDP, CDP, MQTT v3.1.1, secure syslog, ZeroConf |
| Power Supply | PoE IEEE 802.3af/at Type 1 Class 3; typical 5.0 W, max 12.95 W; 12–28 V DC |
| Security Features | Axis Edge Vault; TPM 2.0 (FIPS 140-2 Level 2); secure boot; signed firmware; signed video; AES-XTS-Plain64 256-bit SD encryption; encrypted filesystem; password protection; brute-force delay; IEEE 802.1X; MACsec; HTTPS/HSTS; firewall |
| Environmental / Ruggedness | IEC/EN 60529 IP66/IP67; IK10; NEMA 4X; MIL-STD-810H; ISO 21207 Method B; NEMA TS 2 (2.2.7–2.2.9) |
| Mounting Options | Supports Axis wall, pole, corner, and conduit mounts |
| Sensors | Gyroscopic sensors for EIS; shock detection |
| Events | Audio detection; audio clip events; device temperature alarms; IP address changes; network lost; system ready; ring power overcurrent protection; live stream active; shock detected; storage disruptions or health issues; digital input; virtual input; manual triggers; MQTT (stateless); scheduled and recurring events; video tampering; bitrate degradation |
| Approvals | CISPR 35, CISPR 32 Class A, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-3-2/3-3, EN 61000-6-1/6-2; FCC Part 15B Class A; ICES(A)/NMB(A); VCCI Class A; KS C 9835/9832 Class A; IEC 62236-4; UL/IEC/EN 62368-1; NEMA 250 Type 4X |
[/specifications]
[accesories]
| Included | Camera, installation guide, drill template, TORX L-keys, RESISTORX L-key, terminal block connector, connector guard, cable gaskets, owner authentication key |
| Optional Accessories | AXIS T94F01M J-Box/Gang Box Plate; AXIS T91A47 Pole Mount; AXIS T94P01B Corner Bracket; AXIS T94F01P Conduit Back Box; AXIS Weather Shield K; Axis PoE Midspans; AXIS T8415 Wireless Installation Tool; AXIS Surveillance Cards |
[/accesories]
High-Frame-Rate Thermal Imaging for Dynamic Outdoor Security
The AXIS Q1972-E 10 mm 30 fps variant provides high-frame-rate thermal imaging optimized for fast-moving scenes and perimeter protection. With a wide 63° horizontal field of view and a 640×480 uncooled sensor offering <20 mK sensitivity, it delivers precise thermal contrast even in total darkness, smoke, or fog. Built with ARTPEC-8 and DLPU, it enables advanced on-edge analytics and reliable detection.
Key Benefits
- High-frame-rate 30 fps thermal imaging
- Wide 63° horizontal coverage
- 640×480 sensor with <20 mK sensitivity
- ARTPEC-8 with DLPU for advanced analytics
- Electronic image stabilization (EIS)
- IP66/IP67, IK10, NEMA 4X rugged design
- Advanced cybersecurity with TPM 2.0 and Axis Edge Vault
Ideal Use Cases
- Dynamic perimeter surveillance
- Wide-area industrial security
- Applications requiring smooth thermal video
- Environments with difficult lighting or harsh conditions
Technical Specifications Summary
- Image sensor: 640×480 uncooled microbolometer, 17 μm
- Lens: 10 mm F1.2; 63° × 46° FoV
- Video: H.264/H.265/MJPEG; up to 30 fps
- Sensitivity: NETD <20 mK
- Power: PoE Class 3; 12–28 V DC
- Environment: IP66/IP67, IK10, NEMA 4X
- Security: Edge Vault, TPM 2.0, secure boot, signed video
Upgrade Your Operations
Enhance outdoor security with fast, high-quality thermal imaging and powerful on-edge analytics.
